The last comment and 50 other comment(s) need to be approved.
8replies
Riccardo Depetro says:
Hallo, I have bought a F1 extruder and it seem to be of excellent quality. I have to mount it on a FLSun Super Racer. I have one question: do You recommend a mounting direction or it is fully reversible? Do have already received a feedback on any adjustment to be e-step setting for this specific machine? Do You have any suggestion for properly set the pressure on filaments for different filaments types (PLA vs ABS vs TPU vs Nylon for example)?
Thank You in advance and again compliments for the excellent quality of Your product.
The installation direction of OMG F1 series extruder can be used for both left and right hands. The direction of the filament can be adjusted freely,
The filament direction can also be modified by adjusting the firmware
Hi guys, Please assist on how to attach the f1 extruder to a hotend eg a V6, this is driving me nuts as no-one apparently shows this and I cannot comprehend how a good filament path is possible without this..
Please help?
I loved the filament connector without bowden I bought another unit some time ago, but I can’t find that part in the spare partas that came with, I would like to buy that connector, do you have any link to buy it
How is true retraction (length, speed) for direct drive with Ender E3v2 (bimetal heatbreak without PTFE)? There on your pages is speed 5mm and 5mm length. On pages on Aliexpress are values 5-10mm/s and 0.5mm length .
Retraction value setting
This value is a variable – depending on the way the filament is fed: far end or direct extrusion
Generally, the long-distance (far end) Retraction speed is faster, such as 10mm/s, 10mm
Filament hardness: also has an impact, compared with ABS PETG, elastic material filament,
Retraction should be faster and the distance should be larger
Hallo, I have bought a F1 extruder and it seem to be of excellent quality. I have to mount it on a FLSun Super Racer. I have one question: do You recommend a mounting direction or it is fully reversible? Do have already received a feedback on any adjustment to be e-step setting for this specific machine? Do You have any suggestion for properly set the pressure on filaments for different filaments types (PLA vs ABS vs TPU vs Nylon for example)?
Thank You in advance and again compliments for the excellent quality of Your product.
Best regards
Riccardo Depetro
The installation direction of OMG F1 series extruder can be used for both left and right hands. The direction of the filament can be adjusted freely,
The filament direction can also be modified by adjusting the firmware
E-STEP information can be viewed
https://www.my3dtech.de/e-step/
Recommendation: Test fine-tuning after setup.
Hi guys, Please assist on how to attach the f1 extruder to a hotend eg a V6, this is driving me nuts as no-one apparently shows this and I cannot comprehend how a good filament path is possible without this..
Please help?
Thx
https://www.aliexpress.com/item/1005003690530728.html
You can try to buy E3D v6 hot end adapter
I loved the filament connector without bowden I bought another unit some time ago, but I can’t find that part in the spare partas that came with, I would like to buy that connector, do you have any link to buy it
How is true retraction (length, speed) for direct drive with Ender E3v2 (bimetal heatbreak without PTFE)? There on your pages is speed 5mm and 5mm length. On pages on Aliexpress are values 5-10mm/s and 0.5mm length .
Retraction value setting
This value is a variable – depending on the way the filament is fed: far end or direct extrusion
Generally, the long-distance (far end) Retraction speed is faster, such as 10mm/s, 10mm
Filament hardness: also has an impact, compared with ABS PETG, elastic material filament,
Retraction should be faster and the distance should be larger
Hi, just bought the Dm1-A set, is this one compatabible with the micro swiss hotend? Or do I need different adapter?